Edersee BF16

The Murdock BF16 series is a wall-mounted, H2O-to-Go touchless water bottle filling station. Non-refrigerated, ADA and made of stainless steel. out “Edersee” is connected to the water pipe for environmental friendly tap water supply. It is completely made of stainless steel, available to be activated contactless or with push button. The bottle filler with fixed water connection is space-saving installed on the wall. Thanks to its simple supply of drinking water the solid water dispenser is easy to operate and literally maintenance-free. The water jet is triggered by a proximity sensor, which is activated without contact as soon as a bottle or cup is placed in the dispensing area. Should some water get lost, the drip tray catches splashing water and directs it to the sewage connection. In the drinking water dispenser, 2 LEDs illuminate the water output area. Maintenance is possible independently by unscrewing 2 screws.

Product features

• Material: Type 304 stainless steel
• Proximity sensor for contactless filling of bottles and cups
• Automatic water stop after 20 seconds so that water does not accidentally run without using it
• Water flow volume: approx. 3.8 litres/minute
• Easy maintenance with just a few steps
• certificate: NSF/ANSI 61 (standard for drinking water system components to ensure that no harmful contaminants get into drinking water)
• DVGW certification is pending and is expected to be issued in 2023
• Optional: automatic hygienic flushing to reduce stagnant water (emits a water jet every 4 hours to clean the pipes)
• Optional: push-button operation with mechanical, self-closing push button for energy-saving, low-maintenance operation

The tap water dispenser is particularly hygienic with an optional hygienic rinse, which automatically flushes the drinking fountain with fresh water every four hours. This makes the drinking water dispenser a”fresh water dispenser”. Since the flushing is battery-operated and no power line has to be laid, you save yourself the hassle of additional installation costs.

By the way: The hygienic rinse can also be easily retrofitted if fixed water dispensers have already been installed and has a battery life of around 9 months.

Alternatively, we offer the slightly smaller, contactless built-in water dispenser”San Francisco” on.

Tender text:

Sensor-controlled bottle filler for surface mounting. The bottle filling unit is equipped with a sensor-controlled activation with a maximum operating time of 20 seconds. LED lights illuminate the bottle filling area and light up when a bottle is detected. A display shows how many single-use plastic bottles have been saved by using the water dispenser. The filter status is also displayed via LCD. The water filter is certified according to NSF/ANSI 42 and 53 and reduces the chlorine content in drinking water and removes bacteria and suspended particles. The bottle filler has a flow rate of around 3.78 l/min with a laminar water jet to minimize splashing water. The case has a slim, flat design of approx. 75cm x 46 cm. Easy installation through wall mounting and maintenance by removing the front housing. The bottle filler is made of 304 stainless steel, which is polished on the front due to its satin finish. Antimicrobial, impact-resistant ABS plastic in the dispensing area. The device is certified according to ANSI A117.1, CHSC 116875 and NSF/ANSI 61, section 9.

Product video